TESTA

멀티미터

홈 > 전기·전자계측기 > 메이커별 > ADEX > 멀티미터
  • 중간 크기 이미지
중간 크기 이미지
AX-124N

디지털 멀티 옴 메타

● Resolution:10μΩ

● Maximum measurement range:199.9Ω

● Measurement signal:1kHz

● 4-terminal measurement

● A/D conversion method type double integral

● Digital comparator and BCD parallel out available
30~35일 내 배송

Measuring range and Accuracy (at23℃±5℃)

Range Measuring range Resolution Measuring current Accuracy
20mΩ 0.00mΩ~19.99mΩ 10μΩ 100mA within ± (0.3%rdg+50μΩ+2digit)
200mΩ 0.0mΩ~199.9mΩ 100μΩ 10mA
0.000Ω~1.999Ω 1mΩ 1mA
20Ω 0.00Ω~19.99Ω 10mΩ 100μA
200Ω 0.0Ω~199.9Ω 100mΩ 10μA
Test signal 1kHz ±5% sine wave/applied voltage less than 20mV
Measuring method 4-terminal measurement
Sampling time [Free running mode] 12.5 times/sec.
[Remote start mode] 80msec.
Measuring response time about 0.5sec.
Comparator set range 0000~1999 both for high and low limit
Indication of comparator's comparison result LED indication LO/GO/HI and buzzer
Control signal remote start input
comparison output [LO/GO/HI]:open collector:max.50V, 100mA
end of comparison output [EOC]:open collector:max.50V, 100mA
measured value in BCD parallel (fan out 2)
print command (fan out 2)
range (fan out 2)
Power supply AC100V/117V/220V/240V selectable, 50/60Hz, less than about 15VA
Outer dimension about 260 (W) ×90 (H) ×250 (D) mm 
(excluding protruding parts such as rubber legs, etc.)
Weight about 2.2kg

제품 사양은 변경 될 수 있습니다.

제품마다 납기는 차이가 있을 수 있습니다.

 

 

 

  1. AX-124N - date sheet 다운로드
제품특징 사양서 옵션 다운로드