멀티미터
> 전기·전자계측기 > 메이커별 > ADEX > 멀티미터
Measuring range and Accuracy (at23℃±5℃) [within DC±13V]
Range Measuring range Resolution Measuring current Accuracy 20mΩ 0.00mΩ～19.99mΩ 10μΩ 100mA ±(0.2％rdg+50μΩ)
±2 digit [Slow]
±3 digit [Fast]200mΩ 0.0mΩ～199.9mΩ 100μΩ 10mA 2Ω 0.000Ω～1.999Ω 1mΩ 1mA 20Ω 0.00Ω～19.99Ω 10mΩ 100μA 200Ω 0.0Ω～199.9Ω 100mΩ 10μ Test signal 1kHz±0.1% sine wave/1V r.m.s. (max.) Measuring method 4-terminal measurement [available to contact check] Sampling time [Free running mode] 5 or 15 times/sec. [Remote start mode] about 23msec./106msec． Measuring response time
(Display of time to stabilize)within 20msec. Measuring terminals DC max. voltage DC±25V Comparator set range 3½ Digit (1999) both high and low limit Indication of comparator's comparison result LED indication LO/GO/HI and buzzer Control signal Remote start signal Remote hold signal comparison output [LO/GO/HI]：open collector contact error output [CONT-E]：open collector end of comparison output [EOC]：open collector Operation condition [Temp.] ＋5℃～＋40℃ [Humidity] less than 85％ Power supply AC100V/117V/220V/240V switchable, 50/60Hz, about 50VA Outer dimension about 250 (W) ×99 (H) ×300 (D) mm
(excluding protruding parts such as rubber legs, etc.)Weight about 4.3kg -
제품 사양은 변경 될 수 있습니다.
제품마다 납기는 차이가 있을 수 있습니다.
